德国进口电磁脉冲阀

使用微信扫描二维码分享朋友圈，成交更快更简单！

进口电磁脉冲阀
进口电磁脉冲阀,进口电磁膜片阀,进口电磁隔膜阀,进口直角式电磁脉冲阀,进口淹没式电磁脉冲阀

LIT力特『进口电磁脉冲阀』详细介绍●LIT电磁阀系列●LIT燃气电磁阀●产品数据
►进口电磁脉冲阀描述--
LIT电磁脉冲阀亦称隔膜阀或膜片阀,分为直角式和淹没式两种,直角式电磁脉冲阀是,脉冲袋式除尘器清灰喷吹系统的压缩空气“开关”,而淹没式则阀体进气口淹没在气包内，直接受电信号控制的膜片阀,受脉冲控制仪输出信号的控制，对滤袋逐排喷吹清灰，使除尘器阻力保持在设定的范围之内，以保持除尘器的处理能力和收尘效率
LIT electromagnetic pulse valve, also called diaphragm valve or diaphragm valve, is divided into two kinds of right angle type and submerged type. The right angle type electromagnetic pulse valve is the compressed air "switch" of the pulsate bag dust collector, and the submerged valve body inlet is submerged in the air bag. The diaphragm valve directly controlled by the electrical signal is output by the pulse controller. Control, filter the bag by blowing dust, and keep the resistance of the dust collector within the set range, so as to keep the dust collector's handling capacity and dust collecting efficiency.
►进口电磁脉冲阀原理--
膜片把电磁脉冲阀分为前、后二个气室，当接通压缩空气时，压缩空气通过节流孔进入后气室，此时后气室压力将膜片组件紧贴阀的输出口，电磁脉冲阀处于“关闭”状态。脉冲喷吹控制仪的电信号使电磁脉冲阀衔铁后移，闭后气室放气孔打开，后气室迅速失压，膜片组件后移，压缩空气通过阀输出口喷吹，电磁脉冲阀处于“开启”_状态。脉冲喷吹控制议电信号消失，电磁脉冲阀衔铁复位，后气室放气孔关闭，后气室压力升高是膜片组件紧贴阀的输出口，电磁脉冲阀又处于“关闭”状态。
The diaphragm divides the electromagnetic pulse valve into two air chambers in front and back. When the compressed air is connected, the compressed air enters the rear air chamber through the throttle hole. The pressure of the air chamber will close the diaphragm assembly to the outlet of the valve, and the electromagnetic pulse valve is in the "closed" state. The electric signal of the pulse injection control device moves the armature of the electromagnetic pulse valve, opens the air chamber after closed, and the rear air chamber is quickly lost, the diaphragm is moved back, the compressed air is blown through the valve outlet, and the electromagnetic pulse valve is in the "open" state. Pulse injection is used to control the disappearance of the signal, the reset of the armature of the electromagnetic pulse valve, the closing of the air chamber in the rear air chamber and the pressure rise of the rear air chamber is the outlet of the close valve of the diaphragm assembly, and the electromagnetic pulse valve is in the "closed" state.
►进口电磁脉冲阀用途--
1.直角型电磁脉冲阀其进出口之间的夹角为90°，它适合于储气筒与除尘器喷吹管的安装连接。气流畅通，能提供符合要求的清灰气脉冲。
2.淹没型电磁脉冲阀采用淹没于气包中的安装方法，故称淹没式。它与其他结构形式比较，减少了流通阻力，降低了喷吹气源压力，因而能适用于压力低的场合，且可降低能源消耗和延长膜片寿命。
►进口电磁脉冲阀参数--
阀体材质:铝合金
膜片:丁晴膜片
弹簧:不锈钢
环境温度:0-65℃
压力:0.02-0.8Mpa
接口:20-65mm
介质:空气
连接:G螺纹
注：
1、客户如对产品有特殊要求，须在订货合同中提供以下说明：
a．结构长度；
b．连接形式；
c．公称直径；
d．产品使用介质及温度、压力范围；
e．试验、检验标准及其他要求。
2、本公司可根据客户特定要求配置各类驱动装置。
深圳前港国际贸易有限公司提醒您：如果您对进口阀门的说明有不明白的地方， 请联系我公司相关部门，我们将竭诚为您服务！