肇庆定制脉冲布袋除尘器除尘设备厂家工业除尘器设备,脉冲除尘设备

使用微信扫描二维码分享朋友圈，成交更快更简单！

YDMC-G(MD)型耐压圆筒袋式除尘器
YDMC-G(MD) Resistance to Pressure Cylinder Bag Filter
【概述Introduction】
YDMC-G系列脉冲袋式除尘器是一种的复合式圆筒脉冲除尘设备，能承受较高的正负压的新型、的袋式除尘器，采用圆筒整体锥形结构,切向进风,有利于降低设备阻力;风机除尘器组合一体,降低风网投资,简化工艺流程;具有特喷吹装置，采用框架拆卸式布袋结构，维修方便，除尘效率可达99.9%.应用于操作压力要求较高的条件下,适宜作为真空吸尘系统的终过滤器。该产品具有结构合理，除尘，清灰效果好，运行可靠，维护简单等优点，广泛应用于各行业的粉尘治理和物料回收。

旋风分离器是利用旋转的含尘气体所产生的离心力，将尘粒从气流中分离出来的一种气固分离装置，.旋风除尘器可捕集粒径为5μm以上的粉尘，阻力损失约580～1960Pa，除尘效率80%～98%。它具有结构简单、制造安装容易和维护管理方便、造价和运行费用低、占地面积小等特点，主要用于高浓度粉尘的预除尘和物料分离与回收。按旋风除尘器的结构型式，可分为普通螺旋旋风除尘器(单筒、双筒、多筒)、外旁通旋风除尘器、双旋风除尘器和组合式旋风除尘器。该系列分离器广泛应用于建材、化工、制药、食品、环保等工业生产中。材质有碳钢、不锈钢等。
Cyclone separator is the use of rotating dust gas generated by the centrifugal force, the dust particles separated from the air of a gas-solid separation device, the cyclone can capture the dust particle size for more than 5 microns, the resistance loss of 580 ~ 1960 pa, the dust removal efficiency 80% ~ 90%. It has simple structure, easy to install and easy to maintenance and management, low cost and operation cost and cover an area of an area small, mainly used for the high concentration of dust, dust removal and material separation and recycling. According to the structure of the cyclone type, can be divided into ordinary spiral cyclone（Single cylinder, double cylinder, cone）, outside bypass cyclone, dual cyclone and combined type cyclone. This series of separator is widely used in building materials, chemical, pharmaceutical, food, environmental protection and other industrial production.
【工作原理 Working Principle】
当含尘气流以15-25m/s的速度由进气管进入旋风分离器时，气流将由直线运动变为圆周运动。旋转气流的绝大部分沿器壁自圆筒呈螺旋形向下沿锥体流动。含尘气体在旋转过程中产生离心力，将重度大于气体的尘粒甩向器壁，沿壁面下落到底部排出。
When the dust air at a speed of 15 to 25 m/s from the inlet pipe to cyclone separator, airflow by linear motion into circular motion. For the most part of rotating airflow along the wall since the cylinder spiral downward along the pyramidal flow. Dusty gases produced in the process of rotating centrifugal force, to severe than gas dust particles to the wall, along the wall down to the bottom. Material is carbon steel, stainless steel, etc.

【概述Introduction】
　　CDPK-E-MD系列静电除尘器是一种节能的烟气净化设备，我公司引进并消化国内外技术, 总结了国内设备运行经验后开发出来的新型产品，具有阻力小、分风均匀、运行稳定、除尘等特点，广泛应用于电力、冶金、化工、建材、轻工等工业废气的净化和有用物质的回收。
　CDPK - E - MD series of electrostatic precipitator is a kind of high efficiency and energy saving of the flue gas purification equipment, our company introduce and digest advanced technology at home and abroad, summarizes the domestic equipment developed new products after operating experience, has a small resistance, uniform wind, stable running, high efficiency of dust collection features, widely used in electric power, metallurgy, chemical industry, building materials, light industry and other industrial waste gas purification and recycling of useful material.
【产品特点Characteristics】
 采用宽间距除尘技术，有效的收集高比阻的粉尘
 侧向振打和顶部两种清灰方式灵活选择
 阳极采用整体结构，振打传递加速度的性能，且分布均匀
 放电极采用芒刺线，具有起晕电压低，放电强度大、电晕密度大且不易断线的特点；由于采用刚性框架，振打清灰力度大，电极不易包灰。
 壳体内部优化设计，内部没有支柱和加强杆，可以避免有部分堆积粉尘和妨碍气流的稳定流动，立柱采用‘浮动底座，消除由膨胀引起的应力。
 进口喇叭内设三层多孔板，改善电场内气流均布，出口内设置槽形极板，以捕集微细粉尘，降低出口排放浓度。
 采用热敏电阻带加热高压绝缘系统，自动控制加热温度，结露。